Our Factory: Four Production Bases in Zhejiang and Anhui
Medellin is a cosmetic packaging factory, not a trading office.
Four production bases - paper boxes in Anhui, glass containers in Tongxiang, plastic containers in Hangzhou, and bamboo parts in Anji - sit under one quality system, so a single order can carry glass jars, bamboo lids, and printed boxes without three sets of tolerances.
About 200 staff run the network, with automated lines working around the clock to a daily output of up to 60,000 units and annual capacity above 23 million.

Four Production Bases, One Quality System
Running four bases under one owner removes the usual failure point in mixed-material orders: no one blames the other supplier. Dimensions are agreed once, on one drawing, and inspected against one AQL level.
|
Base |
Location |
What it makes |
Why it matters to your order |
|
Paper box base |
Anhui |
Folding cartons, rigid gift boxes, printed inserts |
Box and bottle ship together, so the box is fitted to the actual container, not to a nominal size |
|
Glass container base |
Tongxiang |
Cosmetic glass bottles and jars, frosted and amber finishes |
Frosting, colour coating, and annealing happen in-house instead of at a subcontractor |
|
Plastic container base |
Hangzhou |
Injection-moulded and blow-moulded bottles, jars, airless packs |
Wall thickness and neck finish controlled at the machine that makes them |
|
Bamboo base |
Anji |
Turned bamboo caps, collars, shells, and jars |
Bamboo is kiln-dried to 8-12% moisture and sealed on six faces before assembly |

Equipment and Daily Output
|
Process |
What it covers |
Where it runs |
|
Injection moulding |
Jars, caps, collars, closures, thick-wall components |
Hangzhou |
|
Extrusion blow moulding |
Shampoo, lotion, and shower gel bottles in PE and HDPE |
Hangzhou |
|
Stretch and injection blow moulding |
PET and PETG bottles with clear walls |
Hangzhou |
|
Glass forming and finishing |
Bottles and jars, clear, frosted, amber, coated |
Tongxiang |
|
Bamboo turning and sealing |
Caps, shells, collars, six-face sealing |
Anji |
|
Printing and decoration |
Silkscreen, hot stamping, spray coating, UV printing, laser engraving |
Hangzhou and Tongxiang |
|
Assembly and packing |
Pump and cap assembly, leak check, export packing |
Hangzhou |
Automated lines run continuously rather than in shifts, which is how a daily output of up to 60,000 units and annual capacity above 23 million are reached. Peak season is planned against the same lines, not against outsourced capacity.
Quality Control: Four Gates
|
Gate |
When |
What is checked |
Standard |
|
Incoming |
Raw material arrives |
Resin grade, colour batch, bamboo moisture, glass defects |
AQL sampling; bamboo at 8-12% moisture |
|
In-process |
During moulding and decoration |
Wall thickness, neck finish, print registration, colour against the approved proof |
First-article approval, then hourly spot checks |
|
Final |
Finished goods |
Capacity, weight, closure fit, appearance, assembly torque |
AQL critical 0 / major 2.5 / minor 4.0 |
|
Pre-shipment |
Before packing |
Carton count, labelling, drop and leak verification on filled samples |
Inverted 24 hours at 40 C with no seepage |
A lot that fails a gate is held, not reworked quietly. You get the inspection record for your lot, not a summary written after the container left.
How We Test a Pack Before It Ships
|
Test |
Method |
What it catches |
|
Inverted hold |
Filled sample inverted 24 hours at 40 C |
Seepage at the closure, thread, or gasket |
|
In-line leak check |
Every production lot, on the line |
Missing or deformed gaskets, cracked shoulders |
|
Pump output |
Measured per stroke against the agreed value |
Under- or over-dosing, which shows up as a consumer complaint, not a factory one |
|
Closure torque |
Measured at sampling and recorded per size |
Caps that loosen in transit or seize on the filling line |
|
Drop test |
Packed carton dropped per ISTA-style sequence |
Corner damage, cap cracking, broken glass in mixed orders |
Pump output is an engine decision, not a marketing one: lotion engines meter 0.5 to 2.0 ml per stroke, fine-mist engines are specified by spray pattern. We confirm the value against your formula before the first lot.
What a Mixed Order Looks Like
|
Step |
What happens |
|
1. One drawing set |
Bottle, cap, liner, and box dimensions are agreed on one drawing, not four |
|
2. One colour standard |
Bamboo, glass coating, plastic, and print are matched to the same Pantone reference |
|
3. One sample round |
A decorated assembly arrives as it will ship: bottle in cap, in box |
|
4. One production window |
Four bases are scheduled to land the components in the same week |
|
5. One inspection |
The assembled set is inspected once, against one AQL level |
|
6. One shipment |
Consolidated, palletised on request, FOB Shanghai |
This is the practical difference between a factory group and four suppliers with a common logo.
Third-Party Inspection and Factory Visits
You do not have to take our inspection record on trust. SGS, Intertek, or your own inspector are welcome at any gate, with two weeks notice so the lot is on the floor and not already packed. Visits to the Hangzhou and Tongxiang bases can be arranged; tell us which processes you want to see and we will build the route around production, not around a meeting room.
Urgent orders are scheduled into the same QC process, not around it. A shorter lead time changes the calendar, not the number of gates.
Certifications You Can Check
|
Document |
Scope |
When it is issued |
|
ISO 9001 |
Quality management across the four bases |
Certificate on request |
|
FSC-certified bamboo |
Bamboo sourcing, chain of custody |
On request |
|
FDA food-contact declaration |
Inner liners and product-contact parts |
With the order |
|
EU 10/2011 declaration |
Plastic parts in contact with the formula |
With the order |
|
REACH and RoHS statements |
All materials |
With the order |
|
Heavy-metal and migration test reports |
Product-contact materials |
Shared before the first order |
|
Patent certificates |
Environmentally related technologies |
On request |
Only documents we actually hold are listed. If your market needs an additional test, tell us the standard and the destination country at quotation stage, and it is quoted as a separate line rather than assumed.
Tell us the processes you want to see and the products you are auditing
we will send the route, the documents, and the inspection record format in one reply.




