Printing and Surface Finishing for Cosmetic Packaging

 

Print method follows material, not the other way round. The same logo that engraves beautifully into bamboo will burn straight through a soft-touch coating, and the gold foil that sits perfectly on a glass shoulder will not hold on a thin PET wall.

 

This page lists what each method does, which materials it survives on, and what decides the price.

ScreenShot2026-11-12162123466

 

 

 

 

 

 

 

 

 

 

Method Matrix

 

Method

How it works

Surfaces it suits

Look

Minimum

Silkscreen

Ink pushed through a mesh stencil, one colour per pass

Glass, PP, PET, aluminium, tubes

Flat, sharp-edged, one or two colours

1,000 pcs standard, 3,000 pcs custom colour

Hot stamping

Heated die presses metallic foil into the surface

Glass, plastic, caps, paper boxes

Metal foil, high perceived value

3,000 pcs

Spray coating

Paint layer applied to the outside of the pack

Glass bottles, plastic jars, caps

Opaque, matte, soft-touch, or gradient

3,000 pcs

Electroplating

Metal deposited on the part

Caps, collars, actuators, some bodies

Full metallic, mirror or satin

3,000 pcs

UV printing

Ink cured by UV light, full colour

Plastic, tubes, caps

Photographic detail, short runs

1,000 pcs

Laser engraving

Beam removes material, no ink

Bamboo, wood, anodised aluminium

Burned-in matte mark, cannot rub off

3,000 pcs, no plate charge

Offset printing

Plate transfers ink to a rubber blanket, then to paper

Folding cartons, rigid boxes, labels

Full colour, fine halftone

1,000 pcs

Embossing and debossing

Die presses the shape up or into the material

Paper, card, some metals

Raised or recessed logo, no ink

1,000 pcs

Labelling

Printed adhesive film applied to the pack

Any smooth surface

Full colour without a plate charge

500 pcs

 

 

 

 

 

lettering
Silkscreen
Spray coating
Offset printing
UV printing
Laser engraving
Embossing and debossing
Spray coating

 

 

 

 

 

 

 

Which Method Works on Which Material

 

Material

Silkscreen

Hot stamp

Spray coat

Electroplate

UV print

Laser

Label

Glass, clear or frosted

Yes

Yes

Yes

No

No

No

Yes

PP

Yes

Yes

Yes

Yes

Yes

No

Yes

PET / PETG

Yes

Yes

Yes

Thin wall: no

Yes

No

Yes

HDPE / PE

Yes

Yes

Yes

Yes

Yes

No

Yes

Aluminium

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Bamboo / wood

Yes, on sealed areas

On sealed areas only

Tint only

No

No

Yes

Yes

Paper and card

Yes

Yes

No

No

No

No

Yes

 

Two limits are worth reading twice. Electroplating a thin-wall PET bottle distorts the wall, so we quote it on caps and collars instead. Laser engraving needs bare material, so it works on bamboo and anodised aluminium but not on a coated plastic surface.

 

 

 

 

 

On Bamboo and Wood: What Works and What Does Not

 

Method

Works on bamboo

Why

Laser engraving

Yes, best option

Burns the mark into the grain, no plate charge, cannot rub off

Silkscreen

Yes, on the sealed surface

Ink needs the six-face seal to key to; raw bamboo absorbs unevenly

Hot stamping

Yes, on flat caps and collars

Curved, knotted areas do not take foil evenly

Spray tint

Yes, light tint only

A full opaque coat hides the grain, which is the reason to buy bamboo

Full-colour print

No

Print covers the grain and costs more than the material is worth

 

Every bamboo part is kiln-dried to 8-12% moisture and sealed on six faces before decoration. Grain and tone shift from batch to batch - that is a property of the material, not a defect, and it is why a Pantone target on bamboo is agreed as a direction rather than a fixed value. Ask for a decorated sample on your own cap before committing to a lot.

 

 

 

 

 

 

How Colour Is Controlled

 

Colour is agreed on a physical chip, not on a screen. Send a Pantone number, a physical sample, or a brand colour code, and we spray a chip on the actual substrate before production. The chip is the reference the lot is measured against.

 

Three things change what a colour looks like, and none of them show on a monitor: the substrate (the same Pantone reads differently on clear glass and on white PP), the coating thickness at a curve, and the light the buyer inspects under. If your artwork has a gradient, the direction and the start point are fixed on the drawing, because a gradient decided at the machine cannot be repeated on the second lot.

 

 

 

 

 

Artwork We Can Print From

 

Item

What we need

File format

AI, PDF, or EPS with live text converted to outlines

Resolution

300 dpi for any raster element

Colour space

Pantone references for spot colours; CMYK for process

Bleed

2-3 mm beyond the print area on labels and cartons

Dieline

We supply the dieline for the pack you order; artwork must sit on it, not on a rectangle

Text size

Caps height enough to stay legible after the mesh fills in - check on the proof

Logo placement

Marked on the dieline with dimensions, not described in words

 

A dieline is issued per pack, per size. If you send artwork drawn for a 50 ml bottle and order a 30 ml, the print area shrinks and the layout has to be re-set.

 

 

 

 

 

 

Proof on a Real Part

 

A screen proof shows colour. A proof on a real part shows whether the method survives the curve, the seam, and the coating. Decorated samples run 7-10 days and the sample charge is credited against your first bulk order.

Approval is in writing, against the physical sample. From that point the sample is the reference for the whole lot, so a later request to "make it a bit warmer" becomes a new approval round, not a machine adjustment.

 

 

 

 

 

 

What Changes the Price

 

Factor

Why it moves the price

Number of colours

Each silkscreen colour is a separate pass and, on some methods, a separate plate

Plate or die charge

One-off, but it is charged before the first unit, not spread across the lot

Print area

Full-wrap print costs more than a one-side logo, in ink, time, and reject rate

Quantity

Plate cost per unit falls with volume; below the decoration minimum the plate cost dominates

Surface preparation

Coating before printing, or plating before assembly, adds a handling step

 

The cheapest way to print a logo is usually laser engraving on bamboo - no plate charge, and it cannot wear off. The cheapest way to print four colours is usually a label. Both are worth checking before you assume foil.

 

 

 

 

 

 

 

Send the artwork and tell us the material and the quantity

 

you get a method recommendation, a plate cost, and a decorated sample timing in one reply.

 

 

 

 

 

 

 

 

 

 

 

Our Team